When status is Connected, tap Advanced to view the client's assigned IP address.
Once your Android Wi-Fi client has a valid IP address, use Ping to verify network connectivity.
If you are trying to connect to the 5GHz wifi, there will be a 5g after the last 3 of the routers MAC address.
Note: If your router has multiple ethernet ports, DO NOT use the WAN port to connect a computer.
This establishes an encrypted tunnel through which the second-phase PEAP credentials may be securely exchanged.This means that you will have to disconnect (unplug) the cellular modem (aircard) from the computer and close the cellular connection manager tool provided by your cellular carrier or, disconnect from any LAN (wired Ethernet) or Wi-Fi (wireless) connections before you will be able to connect your computer to the router either by Ethernet cable or Wi-Fi.By default, the wifi SSID will always be the model of the Cradlepoint router separated by a (-) and then the last 3 of the routers MAC address.It looks like you are using WPA-EAP on your computer.unless you are running into the initial problem that most older hardware had. You may need to do a firmware upgrade on your device that is connecting to the router. Firstly you can not use WPA, you can use WPA-PSK/WPA2-PSK or WEP.Start by verifying that a wireless access point (AP) or router is nearby and actively offering Wi-Fi service.